Industrial IP cameras that are deployed in outdoor environments usually face challenges such as poor lighting, humidity, extreme temperature variations and so on. Moxa's VPort 26 IP camera is designed to sharpen video images and overcome all those problems.

The VPort 26 supports a 2.8 mm to 11m auto iris varifocal lens and comes with a removable IR cut filter for true day-and-night use. With built-in 3D digital noise reduction (DNR), wide dynamic range (WDR) and de-misting functions, the fixed-dome VPort 26 can prevent motion blur and recover real-color images from misty video streams.

Protected in an IP-66-rated and vandal-proof housing, the VPort 26 is robust and weather resistant for critical outdoor applications such as oil and gas, pipeline monitoring, and traffic management.

Contact us

Moxa adopts industrial-grade designs throughout our complete IP surveillance lines for enhanced productivity and protection against uncertain risk and hazards in industrial environments.

Featuring multiple simultaneous H.264/MJPEG/MPEG4 video streaming, all Moxa's IP video servers are designed to work under extreme temperature conditions from -40° to 75°C.

Moreover, Moxa’s IP surveillance solutions enable synchronized video integration to SCADA/HMI systems, such as event video pop-up, live view, historical playback, and pre-event footage.


For Products For SCADA Surveillance Solutions

You can now build up either a centralized or distributed IP recording systems with Moxa's industrial Network Video Recording (NVR) solutions.

For centralized systems, Moxa's SoftNVR-IA 32 -channel IP surveillance software permits direct OPC communication with factory floor automation systems, and allows central live-view, recording, playback, and PTZ control in response to SCADA’s alarm reports.

Alternatively, the MxNVR-IA8 is an industrial-grade IP video recorder designed to record and playback field videos in response to requests from the control center as part of a distributed IP network-based monitoring system.

For more

Check out Moxa's latest ONVIF-qualified products to win more market-share of the railway surveillance industry. Both the VPort 16-M12 IP camera and MxNVR-MO4 in-vehicle DVR are compliant with EN50155 for rolling stock operations requirements.

The IP66-rated fixed dome type VPort 16-M12 has an IF award-winning design that provides excellent H.264 video performance. Customers can leverage the built-in PoE feature to simplify installation and reduce cabling cost.

The 4-channel MxNVR-MO4 has an EN 61373-compliant vibration-proof storage design that supports a 2.5-inch HDD or SDD, ensuring high image quality while recording and storing on moving vehicles.

For more

• H.264/MJPEG dual codec
• Optimal images with 3D DNR, D-WDR & De-mist functions
• Pre-event recording buffer°
• Metal housing for vandal protection
• IP66-rated weather proof
• Fanless design with -40° to 50° operation temperature
• Power over Ethernet in option
• Modbus/TCP for direct SCADA communication
• DynaStream™ supported for bandwidth adaptation
• Built-in SDHC slot for local storage
• OnVIF conformity for flexible integration

• IF awarded design with high quality CCD image
• EN 50155 compliance
• 1/3” CCD camera with maximum resolution of 800 x 600
• Up to 3 H.264 and MJPEG video streams
• Built-in 3D-deinterlace for progressive video image
• IP66 protection with dehumidifying membrane
• Supports DHCP Opt 66/67 for auto-configuration
• DynaStream™ supported for bandwidth adaptation
• Built-in SDHC slot for local storage
• OnVIF conformity for flexible integration

• H.264 and MJPEG dual codec
• 3 simultaneous streams
• Video latency under 200 ms
• DynaStream™ supported for bandwidth adaptation
• OnVIF conformity for flexible integration
• Pre-alarm recording with SD/SDHC support (card extra)
• Two Ethernet ports for cascading or port redundancy
• Additional COM port for serial device connectivity
• Transparent PTZ control
• Modbus TCP support for direct SCADA communication
• Free VPort SDK PLUS bundled
• 802.1X and SSL/SSH for advanced network security
• -40 to 75°C wide operating temperature range

• 4-channel H.264 and MJPEG dual codec
• Each channel supports dual simultaneous streams
• Video latency under 200 ms
• DynaStream™ supported for bandwidth adaptation
• OnVIF conformity for flexible integration
• Pre-alarm recording with SD/SDHC support (card extra)
• Modbus TCP support for direct SCADA communication
• Free VPort SDK PLUS bundled
• 802.1X and SSL/SSH for advanced network security
• Industrial design with -40 to 75°C operating temperature

• Fanless design with low power consumption
• 4-channel H.264 and MJPEG dual codec
• Each channel supports simultaneously dual-stream recording and transition
• One SATA interface for 2.5” HDD or SSD (HDD/SSD excluded)
• Pass EN 61373 vibration testing with a built-in 2.5-inch HDD
• Anti-vibration design with M12, power input, DB9 audio and DI/DO connectors
• Fanless design with -40 to 75°C wide operating temperature (working with SSD)
• DynaStream supported for network efficiency
• Support DHCP OPT66/67 for auto-configuration
• OnVIF conformity for 3rd party interoperability and integration

• Linux system for high reliability
• Zero backbone bandwidth consumption with local video recording and storing
• Supports H.264 ,MPEG4 and MJPEG video recording
• Record up to 8 channels of VPort video streams; up to full D1 @ 240 FPS
• Scheduling and event records supported
• Built-in 2x2.5” SATAII hard disk interface for video storage
• Modbus TCP supported
• Equipped with 1 Gigabit Ethernet port
• 2 serial ports, 6 DIs, and 2 DOs supported for connecting external devices
• 802.1X supported for higher security
• Up to -40 to 75°C operating temperature (with SSD)
• Robust, fanless, 19” rackmount design

• Centralized live view, recording, playback,
• PTZ control and video archive
• Up to 32 channels in a single system
• OPC connection for easy SCADA integration
• Allow SCADA alarms to trigger video recording
• Easily add video pop-up for SCADA display
• e-Map with map view and live video thumbnails
• Support H.264, MPEG4, and MJPEG formats
• Dual monitor display capability
• Supports English, Traditional Chinese, and Simplified Chinese

VPort SDK PLUS is bundled free with VPort products to help customers deploy their tailor-made video management applications for viewing, recording, PTZ control, event trigger, and historical playback.

To save you time and cost, customers can further take advantage of the included VPort Video Gadget, which is a code-free programming tool and takes only 3 steps to integrate surveillance video control with open standard SCADA systems, such as Citect, InTouch, and Cimplicity.