| |
|
4-channel Video Server for Remote Surveillance
via TCP/IP Networks
Overview |
| |
MOXA VPort 2140 Video Server, equipped with
4-ch video input and 4-ch video output, image
digitizer, image compressor with MJPEG compression,
and web server with 10/100 Mbps Ethernet/ Modem
dial-in interface, can digitize analog video
sources and distribute digital images over a
computer network, turning your CCTV system into
a "Video over IP" Network System INSTANTLY.
|
|
Benefits |
| |
- Access
Anywhere & Anytime
Users can remotely access any video camera
connected with VPort 2140 Video Server
from anywhere and anytime via Ethernet
or Internet to get the benefit of central
management. VPort 2140 Video Server supports
10/100 Mbps Ethernet and Modem dial-in
connection network interfaces for different
application requirements.
- Save on Manpower and
Cost of Wiring
There's no need to construct a coaxial
cable network to transmit video images.
Simply use an existing IP network, and
save on effort and the cost of system
installation and wiring.
- Integrated Network
System Structure
In contrast to CCTV systems, system integrators
can use VPort 2140 Video Server to integrate
various functions, such as camera management,
video storage, video recording and playback,
VMD (Video Motion Detection), video interaction
with DI/ DO devices, etc., over an IP-based
network. System integrators and administrators
in system maintenance and expansion will
be extremely impressed by the convenience
of this system.
- Built-in Web Server
for video management and control
MOXA VPort 2140 has a built-in Web Server
that allows users to fully manage and
control camera and video images. In addition
to viewing and camera/video settings,
some advanced functions, such as VMD (Video
Motion Detection), PTZ camera control,
and sequential viewing, are also provided
by VPort 2140. In addition, snapshot images
taken by either VMD or sequential mode
can be obtained by email or FTP to inform
users of the status of events.
- Automatic Video Surveillance
System via interacting with I/O sensors and
alarms
MOXA VPort 2140 Video Server comes equipped
4 Digital Input and 2 Relay Output to
connect with sensors and alarms. By using
system software (such as MOXA SoftDVR™
Pro IP Surveillance Software) or Script
Command programming, users can construct
an automatic video surveillance system
by setting the interaction between cameras
and DI/ DO devices.
|
Features |
| |
- 4-ch MJPEG Video Server
- 4 BNC video input and 4 BNC video output
(75 ohm terminal switch off )
- Stand-alone with built-in web server for
network interface
- Industry-standard real-time operating system
without virus threat
- Real-time performance with powerful DSP
- Optimal solution by adjustable frame rate,
bandwidth, and quality
- Video Motion Detection with Pre/Event/Post
images
- General I/O for external sensor and alarm
- Supports 2 RS-232/485 COM port for PTZ camera
control or Modem dial-in connection
- Remote access of images via FTP or e-mail
- Password protection and administrator privilege
- Customized personal homepage
- Remotely upgrade the firmware to keep it
in the best state
- Easy but powerful utilities for installation
and maintenance
- Free bundled MOXA SoftDVR™ IP Surveillance
Software for viewing and recording
* ActiveX Control SDK supported with flexible
interface and sample codes for third-party
developers (please contact with MOXA sales
representative for requiring this SDK)
|
Application Structure
|
| |
|
MOXA SoftDVR™
Lite IP Surveillance Software
|
| |
- Support 1 to 4-ch (Quad) viewing in a single
PC, max. 4 cameras
- Max. 32 users in a system and users privilege
management by administrator
- Record video file is in AVI format and can
be store in the local PC
- Recyclable override of hard disk space in
FIFO sequence
- Support Video Motion detection by each camera
- Support image setting and PTZ cameras control
for each camera
- View and Record by schedule or event triggering
for each camera
- Take snapshot in playback mode to get JPEG
images for editing, printing, or to save as
a evidence
- Dynamically adjust recording frame rate
over LAN/ Internet to match the real frame
transmit speed, to keep the video synchronized
with the actual time
- Resume viewing and recording automatically
after system reboot
- Cameras can be managed easily with your
own e-map
|
| |
|
| |
Main Page |
|
Playback mode |
|
System Configuration |
Specifications
| System |
CPU |
Trimedia
PNX1300 VLIW DSP |
| RAM |
16
MB SDRAM |
| ROM |
2
MB FLASH ROM |
| Network |
Protocol |
TCP/IP,
HTTP, SMTP, FTP, Telnet, NTP, DNS, and DHCP |
| Modem |
PPP
(Dial-up, direct cable connection) |
| Ethernet |
10baseT
Ethernet or 100baseT Fast Ethernet auto negotiation |
| Algorithm
Supported |
JPEG, MJPEG |
| Video
|
4
analog video inputs
4 loop-through outputs |
| NTSC/PAL
|
Auto-sensing or manual |
| Features |
Adjustable image size and quality
B/W or color control
Quad screen display
Time stamp and text overlay |
| Video
Resolution |
NTSC |
Up
to 30 frames at 176x120
Up to 30 frames at 352X240
Up to 9 frames at 704X480
Up to 9 frames for QUAD |
| PAL |
Up
to 25 frames at 176x144
Up to 25 frames at 352X288
Up to 8 frames at 704X576
Up to 8 frames for QUAD |
| Viewing
System Requirement |
Operating
System |
Microsoft
Windows, Linux, Unix and Mac OS |
| Browser |
Internet
Explorer 4.x or above,
Netscape Navigator 4.x or above |
| GPIO |
4
opto-isolated sensor inputs (max. 12VDC 50mA)
2 Relay output (max. 24VDC 1A, 125VAC 0.5A) |
| Alarm
Features |
Motion detection with percentage and sensitivity
Daily repeat timing schedule
3 color images per camera for pre/post alarm image
storage Automatic transfer of stored images via
email or FTP with event-triggered actions |
| Serial
Port |
COM
1 |
RS-232
(9-pin D-SUB) or RS-485 (Terminal block) max.115.2Kbps |
| COM 2 |
RS-232
(9-pin D-SUB) max.115.2Kbps |
| PAN/TILT/ZOOM |
PTZ camera control through RS232 or RS485 COM port;
Supported units and protocol,
Sony EVI-D30/31
Canon VC-C1,
VC-C3Dynacolor SmartDOME
Pelco D-protocol Dome
Liling
Ernitec
Custom Cameras (use the simple programmable platform) |
| Firmware
Upgrade |
Via bundled Upgrade Wizard or FTP |
| Security |
User level password protection |
| LED
Indicator |
Network |
ACTIVE
indicator for network active
LINK indicator for 10/100 Mbps Status
FDX indicator for full duplex |
| System |
POWER
indicator
CONNECT indicator for system ready
SERIAL indicator for serial status |
| Power |
Input: 12 VDC, 1.5 A
Consumption: near 7.8 W |
| Dimensions (W
x D x H) |
193.71
x 195 x 44.3 mm |
| Weight |
890
g |
| Operating
Environment |
Operating Temperature |
0
to 65°C (32 to 149°F) |
| Storage
Temperature |
-40
to 70°C (-14 to 158°F) |
| Humidity
|
5%
to 95% (non-condensing) |
| Housing
|
Panel Mounted with L-type fixed aluminum piece |
| Regulatory
Approvals |
CE, FCC |
| Warranty
|
5
years |
| Bundled-Free
Software |
MOXA SoftDVR™ Lite:1 to 4-ch IP Surveillance Software
for viewing & recording in a single PC |
Ordering Information
| VPort 2140 |
- 4-ch MJPEG Video Server with 100-240V power
adaptor (12 VDC, 1.5A)(12VDC, 1.25 for UK
Plug
|
|
|
|
|
|
