MOXA VPort 2110 Video Server, equipped with 1-ch video input, image digitizer, image compressor with MJPEG compression, and web server with 10/100 Mbps Ethernet/ Modem interface, can digitize analog video sources and distribute digital images over a computer network, turning your CCTV system into a "Video over IP" Network System INSTANTLY.

• Access Anywhere & Anytime

  Users can remotely access any video camera connected with VPort 2110 Video Server from anywhere and anytime via Ethernet or Internet to get the benefit of central management. VPort 2110 Video Server supports 10/100 Mbps Ethernet and Modem dial-in connection network interfaces for different application requirements.

• Save on Manpower and Cost of Wiring
  

  There's no need to construct a coaxial cable network to transmit video images. Simply use an existing IP network, and save on effort and the cost of system installation and wiring.

• Integrated Network System Structure
  

  In contrast to CCTV systems, system integrators can use VPort 2110 Video Server to integrate various functions, such as camera management, video storage, video recording and playback, VMD (Video Motion Detection), video interaction with DI/ DO devices, etc., over an IP-based network. System integrators and administrators in system maintenance and expansion will be extremely impressed by the convenience of this system.

• Built-in Web Server for video management and control

  MOXA VPort 2110 has a built-in Web Server that allows users to fully manage and control camera and video images. In addition to viewing and camera/video settings, some advanced functions, such as VMD (Video Motion Detection), PTZ camera control, and sequential viewing, are also provided by VPort 2110. In addition, snapshot images taken by either VMD or sequential mode can be obtained by email or FTP to inform users of the status of events.

• Automatic Video Surveillance System via interacting with I/O sensors and alarms

  MOXA VPort 2110 Video Server comes equipped 1 Digital Input and 1Relay Output to connect with sensors and alarms. By using system software (such as MOXA SoftDVR™ Pro IP Surveillance Software) or Script Command programming, users can construct an automatic video surveillance system by setting the interaction between cameras and DI/ DO devices.

• Compact size, 1-ch MJPEG Video Server
• 1 BNC video input
• Stand-alone with built-in web server for network interface
• Industry-standard real-time operating system without virus threat
• Real-time performance with powerful DSP
• Optimal solution by adjustable frame rate, bandwidth, and quality
• Video Motion Detection with Pre/Event/Post images
• General I/O for external sensor and alarm
• Supports 1 RS-232/485 COM port for PTZ camera control or Modem dial-in connection
• Remote access of images via FTP or e-mail
• Password protection and administrator privilege
• Customized personal homepage
• Remotely upgrade the firmware to keep it in the best state
• Easy but powerful utilities for installation and maintenance
• Free bundled MOXA SoftDVR™ IP Surveillance Software for viewing and recording
  
  * ActiveX Control SDK supported with flexible interface and sample codes for third-party developers (please contact with MOXA sales representative for requiring this SDK)
  

• Support 1 to 4-ch (Quad) viewing in a single PC, max. 4 cameras
• Max. 32 users in a system and users privilege management by administrator
• Record video file is in AVI format and can be store in the local PC
• Recyclable override of hard disk space in FIFO sequence
• Support Video Motion detection by each camera
• Support image setting and PTZ cameras control for each camera
• View and Record by schedule or event triggering for each camera
• Take snapshot in playback mode to get JPEG images for editing, printing, or to save as a evidence
• Dynamically adjust recording frame rate over LAN/ Internet to match the real frame transmit speed, to keep the video synchronized with the actual time
• Resume viewing and recording automatically after system reboot
• Cameras can be managed easily with your own e-map oftware to manage your video transmission traffic by setting the cameras' action.
  
  

Main Page

Playback Mode

System Configuration

Video
Resolution

Viewing System Requirement

• 1-ch MJPEG Video Server with 100-240V power adaptor (12 VDC, 1.2A) (12VDC, 1.25A for UK Plug)

• DIN-Rail Mounting Kit (35 mm) for VPort 2110