| |
|
MOXA
SoftDVR™ Pro
Expandable and Integratable IP Surveillance
Software |
|
|
Overview |
| |
MOXA SoftDVR™ Pro IP Surveillance Software
is designed for IP Surveillance systems that
use MOXA VPort 2100 series Video Servers as
the Distributed Video Networking solution. With
the help of MOXA SoftDVR™, system integrators
can seamlessly integrate other applications,
such as I/O Sensors and Alarms, with CCTV Systems
over an IP-based network. |
|
Viewing and playback, anywhere
& anytime |
| |
- Remote access from popular web browser
- Supports 1, 4, 6, 8, 9, 10, 13, 16 camera
viewing formats
- Maximum of 16 cameras in a system
- Historical playback by time and event
- Zoom-in/Zoom-out function for individual
cameras when playing back images
- Take snapshots in playback mode to get JPEG
images for printing or to save as evidence
- Can adjust the contrast, brightness, sharpness,
blur, and grayscale of the snapshot image
|
|
|
|
Recording & Storing over
the Ethernet/ Internet |
| |
 Recording action can be triggered in
round-the-clock or event mode
- Record video in AVI format—compatible with
popular media players
- Dynamically adjust recording frame rate
over the LAN/Internet to match the real frame
transmit speed, to keep the video synchronized
with the actual time
- Recyclable override of hard disk space in
FIFO (First-In-First-Out) sequence
- Recorded video files can be stored on a
local PC or Windows-based networked storage
server
|
Schedule jobs for the recording
and remote service |
|
|
|
Alarm message triggered and sent |
-
Area-selectable Video Motion Detection (VMD) function
for each camera
-
Sensitivity tuning for the VMD
-
Alarm can be triggered by VMD, video failure, communication
failure, system fault, storage failure,
storage full, GPI, and then sent by email
or GPO, or trigger PTZ camera to a preset
position
|
 |
|
|
Video Server Configuration &
System Management |
- Supports MOXA VPort series Video Servers
- Can
configure each camera’s name, video quality,
and video resolution separately
- Supports PTZ camera controls (Same as VPort 2100 series
Video Servers’ support list)
- Up
to 32 users can to be added in a system
- Supports remote firmware upgrade
- Can
import/export configuration from/to VPort
Video Servers
- Can
set up the view and system operation by
each users
- Automatically resume viewing and recording after system
reboot
- Can
review historical system status via system
log
- Cameras
can be managed easily with your own e-map
|
|
|
|
Ordering Information |
| SoftDVR™ Pro: CD with SoftDVR™
Pro and Manual
|
-
System Requirement
-
MS Windows 2000/XP (2000/ XP recommend),
-
Intel 1GHz Pentium III or above (2.4GHz Pentium 4
recommend)
-
256 MB SDRAM or above (512 MB recommend)
-
32 MB Display Memory or above
-
DirectX 8.1 or above
|
SoftDVR™ Lite bundled free
with VPort 2100 series Video Servers
Differs from the SoftDVR™ Pro in:
 1 to 4-ch (Quad) viewing format; max.
4 cameras
- No
remote service, such as viewing from web browser
and storing on a network hardisk
- VMD
in full image comparison
- No
I/O sensors & alarms management for alarm
messages
- System
Requirement:
MS Windows 98SE/2000/XP, Intel 550MHz Pentium
III or above, 128 MB SDRAM or above, DirectX
8.1 or above
|
|
|
|
|
|
