| |
|
ME60 Series |
|
|
| 10/100BaseT(X) to
100BaseFX Single-Strand Fiber Converter |
Overview |
| |
Using the fiber optic medium for Ethernet
applications has become more popular due to
fiber optic's excellent physical features,
especially for long distance networks. However,
fiber optic cable is very expensive, so if
we can device a solution that uses only 1
cable instead of 2, the infrastructure cost
can be cut in half. This is where Moxa comes
in. The Moxa ME60 Series provides a solution
that reduces your expense by 50%!
The Moxa ME60 Series of Single-Strand Fiber
Converters supports Wavelength Division Multiplexing
(WDM) technology that allows two independent
data communication channels to transmit and
receive over one standard, single mode, fiber
optic line. This not only doubles your existing
bandwidth, but also effectively reduces your
expense of new fiber optic infrastructure. |
|
Features |
| |
- Single-Strand Fiber Converters allow transmission
and receiving over single strand fiber with
WDM technology
- Media Conversion between 10/100BaseT(X)
and 100BaseFX
- Supports 10/100BaseT(X) auto-negotiation
- Select TP port's cable connection by DIP
Switch
|
| 50% Cost Saving for
Fiber Optic Infrastructures |
| With a set of ME60 series
products (ME60A and ME60B), you can double the
utilization of your existing, costly fiber optic
cable, but save 50% of the cost of a newly installed
fiber optic application. |
| General Media Converter
Solution |
| A general media converter
requires a pair of fiber optic cables for
data transmission and receiving.
TX/RX over a pair of fiber optic cables
|
| Single-Strand Fiber
Converter Solution |
| Wavelength
Division Multiplexing (WDM) supports bi-directional
data transmission and receiving using dual
wavelengths (1310/1550 nm) over a single strand,
of single-mode optical fiber.
TX/RX over one fiber optic strand
|
Specifications
Interface
| RJ45
ports |
10/100BaseT(X) |
| Fiber
ports |
100BaseFX
(Only SC connectors available) |
| LED
Indicators |
Power,
LNK/ACT, 100, FDX/COL |
Technology
| Standards |
IEEE802.3/802.3u |
Cable limitations
| TP
port |
Cat.
5 for up to 100 m |
| Optional |
8.3/125,
8.7/125, 9/125 µm (recommended) or
10/125 µm single-mode |
| Wavelength |
TX: 1310,
RX: 1550 nm for ME60A
TX: 1550, RX: 1310 nm for ME60B |
| Min.
TX Output |
-10 dBm |
| Max.
TX Output |
-7 dBm |
| Sensitivity |
-32 dBm |
Mechanical
| Dimensions
(D x W x H) |
94 x
70.3 x 26.2 mm |
Power
| Input Voltage |
5
VDC |
| Input
Current |
1A |
Environment
| Operating Temperature |
0
to 50°C |
| Ambient
Relative Humidity |
5 to
90% (non-condensing) |
| Regulatory
Approvals |
CE, FCC |
Ordering Information
| ME60A-S-SC |
10/100BaseT(X) to 100BaseFX Single-Strand Fiber
Converter, TX 1310 nm, RX 1550 nm, SC |
| ME60B-S-SC |
10/100BaseT(X) to 100BaseFX Single-Strand Fiber
Converter, TX 1550 nm, RX 1310 nm, SC |
| All
items include |
- All items include User's Manual &
Power Adaptors
*You must purchase both ME60A and ME60B, since
these products work as a pair. |
|
|
|
|
|
