:: Embedded Module & System
  :: Industrial Computing
  :: Industrial Networking
  :: Industrial Serial Comunication
  :: Network Computing
  :: WLAN
 
 

MAXIMUMCONNECTIVITY@MINIMUMSIZE
   
  • Scaleable via ETX-CPU modules
  • 3x 10/100 MBit Ethernet
  • 2x USB
  • 2x RS232 serial ports
  • LPT/FDD interface
  • 2x PS/2
  • Board dimensions just 118.5x116.3 mm (4.7"x4.6")
  • VGA/JILI LVDS interface
  • Sound
  • DIMM-PC/IO socket for add on cards: 10 MB Ethernet, Analog Modem V.92, ISDN or Bluetooth
  • IDE HDD or CompactFlashCard™ socket onboard
  • 9 - 32 V power input range
The microSERVER is a carrier board, which allows the rapid development of numerous ETX based solutions. Sometimes it is not necessary to design an own base board, just a small embedded PC will do the job. Beneath all ETX standard interfaces, the microSERVER offers two independent 10/100Base-T controllers and a DIMM-IO
socket for further enhancements like BlueTooth™ modules or modems. So building intelligent and scaleable routers or segmenting a network is now an easy task.

To learn more about this product, please contact microSERVER@kontron.com.

CONNECTIVITY HARDWARE
DIMM-PC/ISDN ISDN module with 2 channels and Eurofiletransfer
DIMM-PC/ETIS1 10MBit Ethernet plus ISDN module with 2 channels and Eurofiletransfer
DIMM-PC/MD Modem module, 56k flex, V.92, UART16550 compatible
DIMM-PC/BT1 Complete BlueTooth™ connectivity module with DIMM-PC dimensions, UART 16550 compatible

ACCESSORIES
ADA-PS/2-1 adapter board with cable for PS/2 interface
KAB-PS/2Y-1 Y-cable for parallel use of PS/2 keyboard and mouse
ADA-LPT-1 adapter board with flat foil cable for parallel printer or FDD use on microSERVER carrier board
ADA-SOUND-1 adapter board with cable for SOUND interface of microSERVER carrier board
microSERVER mounting kit includes screws, spacers and brackets
KAB-VGA-2 Cable from MOPSlcd PC/104 boards to CRT (15 pin DSUB)
KAB-DSUB9-2 DSUB9 male Connector to 10 pin Header cable
ADA-FLOPPY-2 adapter and cable to connect a standard floppy drive